VTech ET685 Administrator And Provisioning Manual page 118

Eristerminal sip deskset
Table of Contents

Advertisement

Setting
Call Forwarding:
Always
Target
On Code
Off Code
Busy
Target
On Code
Off Code
Timeout
Timeout (sec)
Target
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
If turned on, all calls to the associated identity are diverted
to the number specified by Target. Diversion can either be
handled by the phone or by a server - see parameter
using_server_managed_fwd_all.
The redirection target, when redirection is always active
(Always is set to on).
When set, the given starcode, appended by the redirection
target, will be dialed whenever redirection-always gets
enabled or changes the target for the specific identity.
If the PBX is handling the redirection, it can be specified
which star code disables this functionality at the PBX for the
specific identity.
If turned on and a call is in progress while a 2nd one is
incoming, the second caller is diverted to the number
specified (Target). Note: This will only work if call waiting is
disabled. Diversion can either be handled by the phone or
by a server - see parameter
using_server_managed_fwd_busy.
Specifies the number to which calls will be diverted when the
phone is busy. Note: This will only work if call waiting is
disabled (WebUI: Identity n > SIP > Call Waiting Indication).
When set, the given starcode, appended by the redirection
target, will be dialed whenever redirection when busy gets
enabled or changes the target for the specific identity.
If the PBX is handling the redirection, it can be specified
which star code disables this functionality at the PBX for the
specific identity.
If turned any incoming call will be diverted to the specified
number (Target) after the specified time (Timeout) has
elapsed. Diversion can either be handled by the phone or by
a server - see parameter
using_server_managed_fwd_time.
Specifies the timeout in seconds after which the call will be
diverted.
Specifies the number to which calls will be diverted after the
specified time (Timeout) has elapsed.
118
Back to Contents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents