VTech ET685 Administrator And Provisioning Manual page 235

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
SYSTEM INTERNAL
Title that appears in the edit state for dialing a number.
string
lang_enter_number
enum_suffix
When using ENUM, you can specify a service suffix here, if desired. There
is more than one service that supports ENUM lookups, and you can select
here which one you want to use. You can enter a comma separated list of
route domains for ENUM lookup. Leave the default value e164.arpa if you
don't know better.
comma separated list of route domains
e164.arpa
eth_net
This setting is used to configure the NET port of the phone's integrated
Ethernet switch. The setting value is a comma-separated list of three
items: <speed>,<pause>,<advertisement>
Whereas each item has the following meaning:
<speed> - setting forced Ethernet speed or enabling auto-negotiation
<pause> - enable Ethernet flow control via PAUSE frame (empty value
leaves the feature disabled)
<advertisement> - space-separated list of properties to advertise (empty
advertises all supported properties)
For example, the following setting value would auto-negotiate the Ethernet
speed, while leaving the pause feature untouched (empty value between
the two commas) and advertising that only 1000MBit and 100MBit full
duplex can be auto-negotiated:
auto,,auto 1000full 100full
Note: The values 1000full and 1000half are only supported by phones with
an integrated Gigabit Ethernet switch.
235
Back to Contents