VTech ET685 Administrator And Provisioning Manual page 193

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Text which can be specified in Alert-Info to categorize an internal number.
String
alert-internal
allow_mismatched_sdp_answers
RFC 3264 stipulates that an SDP "answer MUST contain exactly the
same number of "m=" lines as the offer", and that "existing media streams
are removed by creating a new SDP with the port number for that stream
set to zero" (that is, m= lines may be added, but not removed from the
SDP). Some UAs don't adhere to this and drop disabled streams in SDP
answers or new SDP offers within an existing session (for example, when
putting the peer on hold). SDP offers or answers missing an m= line will
normally cause the VTech phone to end the session, unless this setting is
enabled.
on, off
off
allow_rtp_on_mute
Setting this to "on" will allow RTP packets to be sent even on mute,
although they will be silent because of the microphone mute. Turning it
"off" will block the RTP packets altogether on microphone mute.
on, off
off
allow_sip_settings
193
Back to Contents