VTech ET685 Administrator And Provisioning Manual page 298

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blank
ldap_sort_results
This setting can be used to sort the LDAP result set.
on, off
off
ldap_telephonenumber_mapping
Set the number type used for ldap telephoneNumber entries.
When the value of the setting is not one of the valid values the number type
of ldap telephoneNumber entries will be set to unqualified.
office, home, mobile, unqualified
office
ldap_username
This setting specifies the bind Username for LDAP servers. Most LDAP
servers allow anonymous binds in which case the setting can be left blank.
However if the LDAP server does not allow anonymous binds, you will
need to provide the Username and Password allowed to query the LDAP
server.
String
blank
led_blink_fast
This setting is used in conjuction with the presence feature. Whenever the
state of the monitored extension changes, the assigned Led will change its
state. This setting defines the state in which the monitored extension must
be in order for the Led to start blinking fast.
For example, if the content of this setting is 'AWAY OFFLINE', the Led will
blink very fast when the monitored extension's state becomes away or
offline.
298
Back to Contents