VTech ET685 Administrator And Provisioning Manual page 396

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
This is an OCS specific setting. When on, the phone will publish its
machine state to the OCS server as well as its device capabilities. The
machine state is initially 'available'. If the settings inactive_timeout and
away_timeout are set, it will eventually move to 'inactive' and then to
'away'. Note that if you set your phone to not report the machine state it
cannot not be part of a response group (since the phone will never become
available and therefore no calls will be routed to it).
on, off
on
user_report_phone_state
This is an OCS specific setting. When on, the phone will publish its phone
state to the OCS server. This is published in addition to the machine state
(if this is enabled, see setting user_report_machine_state) when the user
goes off-hook. The phone state alwas has an availability of 'busy' and an
activity of 'in-a-call'. When the user goes back on-hook the phone state is
deleted. The phone state will be visible to others only if at least one device
on which the user is logged on also reports the machine state. If you want
the phone state to be visible only while you are also logged on to
Communicator, then set user_report_machine_state to off. When you then
log out of communicator and make a call on the phone, others will see your
state as 'offline'.
on, off
on
user_ringer
Select a ring tone from this pull-down menu that will alert you when a call
comes in for this particular identity.
Ringer1, Ringer2, Ringer3 , Ringer4 , Ringer5, Ringer6, Ringer7, Ringer8,
Ringer9, Ringer10, Silent ,Custom
Ringer1
user_ringer_forwarded_calls
396
Back to Contents