Speed Dial Page - VTech ET685 Administrator And Provisioning Manual

Setting
Lock Keyboard after sec.
(0 = never)
Emergency Numbers
(space separated)
Outbound proxy for
emergency numbers
Character Settings:
upper case
char.sequence key (0-9)
lower case
char.sequence key (0-9)

Speed Dial page

On the Speed Dial page, you can enter up to 32 speed dial numbers, which enable you to
make a call without having to enter the complete phone number.
To dial a speed dial number, enter the speed dial number (0 to 30) or character (#, *)
assigned to the phone number, and then press
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
This setting allows you to configure an inactivity timer (in
seconds). If enable_keyboard_lock is set to on, the phone
will automatically lock the keypad after the configured
inactivity time. The user would then need to enter the
configured PIN in order to unlock the keypad. On OCS
servers this setting is provisioned via inband provisioning
parameter ucPhoneTimeOut.
The specified space separated numbers can be dialled via
keyboard even if the keyboard lock is enabled. Just dial
them as usual without unlocking the keyboard before.
Outbound proxy for emergency numbers.
Define which characters should appear one after another
each time numpad key INDEX (INDEX ranges from 0 to 9)
gets pressed (when input mode is set to upper case letters).
Define which characters should appear one after another
each time numpad key INDEX (INDEX ranges from 0 to 9)
gets pressed (when input mode is set to lower case letters).
.
103
Back to Contents