VTech ET685 Administrator And Provisioning Manual page 374

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
off
tr69_params
Auxillary setting for the TR-069 provisioning. Do not manually change it as
it is automatically set by the phone.
String
blank
tr69_use_acs
Toggle use of TR-069 for configuration.
on, off
off
transfer_dialing_on_other
There is a transfer dial-screen. You get to it by pressing transfer during a
connected call. Dialing a number here and then pressing OK or Transfer
would normally blind transfer the previously active call to that entered
number. This setting allows to instead do a normal outgoing call in that
scenario when pressing the OK-key (set this setting to attended if you
desire this alternative behaviour).
See also setting transfer_dialing_on_transfer which defines the path to be
taken when pressing the transfer-key to confirm the dialing.
blind, attended
attended
transfer_dialing_on_transfer
There is a transfer dial-screen. You get to it by pressing transfer during a
connected call. Dialing a number here and then pressing OK or Transfer
would normally blind transfer the previously active call to that entered
number. This setting allows to instead do a normal outgoing call in that
scenario when pressing the Transfer-key (set this setting to attended if you
desire this alternative behaviour).
See also setting transfer_dialing_on_other which defines the path to be
taken when pressing non-transfer keys to confirm the dialing.
374
Back to Contents