VTech ET685 Administrator And Provisioning Manual page 163

Setting
Un-/Tag VLAN traffic
to/from specific switch
ports
PC Port:
VLAN Id (1..4094)
VLAN Priority (0..7)
IEEE 802.1X
Authentication:
User
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
VTech phones of ET6xx-series have an internal
ethernet-switch capable of handling vlan (set tags and unset
them)
This setting defines whether the switch will handle the vlan
tagging or not.
Handling means that pakets from the internal ports to the
network are tagged (vlan id is added) and tagged pakets
(vlan set) from the network are untagged (vlan id is
removed) and assigned to the port they belong (selection by
vlan id).
Example: Pc-port is configured vlan 3 and the option is set
to on, pakets arriving from the pc on the pc-port are tagged
with vlan 3 and sent to the network.
Pakets arriving from the network containing vlan id 3 will be
assigned/send to pc-port, but before that the vlan id (3) is
removed. So the pc will receive a paket without vlan id.
Network --- VLAN ID 3 --- phone with int. switch ---- No Tag
---- PC
On: Phone-internal switch handels the vlan-pakets.
To Network direction -> vlan ids are set, From Network ->
vlan id are unset
Off: phone internal switch does not touch the pakets.
Independent of vlan id set or not, pakets are not changed,
connected device has to take care.
Any incoming packet on the PC port is tagged with this
VLAN ID.
This is the priority of the VLAN.
This setting determines the IEEE802.1X EAP authentication
method. When EAP-MD5 is selected, the settings
ieee8021x_eap_md5_username and
ieee8021x_eap_md5_password must be set appropriately.
When EAP-TLS is selected, certificates and config file must
be provided (Certificates -> 802.1X Certificates).
This setting specifies the username that is used for
IEEE802.1X EAP-MD5 authentication.
163
Back to Contents