VTech ET685 Administrator And Provisioning Manual page 401

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blank
user_tlsdsk_store
This setting applies only to the UC edition and is for the phone's internal
use only to persistently store data required for TLS-DSK authentication.
The setting is cleared when the "Logoff User" function is invoked.
String
blank
user_uid
The user_uid value is generated and stored in the setting on a fresh phone
when an account is setup. If you reboot the phone afterwards it will use the
same uuid value as the one generated/stored in the settings. Naturally if
you reset the phone this setting will also be erased and the next account
setup will generate a new uuid. If you provision the user_uid setting the
phone will use that value instead of generating a new one on its own. The
uuid is used in the contact header of SIP REGISTER messages.
a sequence of randomly generated bytes according RFC 4122
blank
user_wait_for_ntp_before_register
In some environments it is essential for the registration process, that the
phone has the correct time. When this setting is turned on, the phone will
wait for the reception of the time from the ntp server before trying to
register the associated identity.
on, off
off
user_was_registered
SYSTEM INTERNAL
Flag showing whether identity was ever registered since last identity reset.
This is the identity-based version of setting was_never_registered.
true, false
401
Back to Contents