VTech ET685 Administrator And Provisioning Manual page 153

Setting
Call Released
Notification
Dialtone during Hold
Play music during hold
Holding Reminder
Alert Info playback
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Set this to "on" if the release sound should be played when
the remote party terminates the call.
Set this to "off" if no sound should be played when the
remote party terminates the call. (A busy sound is played
when the remote party is busy or denies an incoming call.)
Release 8.4.XX only:
Set this to "off" if no sound should be played when the
remote party is busy or denies an incoming call in auto redial
mode. (No sound is played when the remote party
terminates the call.)
Set this to "off_when_terminating_calls" if the busy sound
should be played when the remote party is busy or denies
an incoming call in auto redial mode. (No sound is played
when the remote party terminates the call.)
Turning this setting "on" will play a dial tone when a call is
being held, signalling the user that he/she is able to dial a
second number. No dial tone is played when this setting is
set to "off".
Enable this setting if you want to stream music from your
local phone to the callers on hold. The music is stored on
your phone and can be exchanged via provisioning.
When this option is set to 'on', the phone reminds you with
a short beep that you still have somebody on hold.
If you want your phone to replay audio system messages
when they are provided, set this option to "on". Additionally,
you will see a message on the display. When you set the
option to "off", you will only see the message on the display.
153
Back to Contents