VTech ET685 Administrator And Provisioning Manual page 342

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
When enabled the phone will make an actual call with audio instead of just
sending an sip invite whenever it has to dial starcodes (see these starcode
settings for redirect_always_on, redirect_always_off, redirect_busy_on,
redirect_busy_off, redirect_time_on, redirect_time_off, dnd_on, dnd_off).
If the PBX plays a confirmation message for certain starcodes (for example
'Do-not-disturb activated') and this setting is on, the user will be able to
hear this confirmation message.
Be aware that there can only be one outgoing audio-call at a time, so this
setting doesn't work well when issuing starcodes for multiple identities at
once.
on, off
off
server_directories
If the on-line telephone directory search is to be limited to certain
directories or groups these may be specified here, separated by a space.
If left empty, all directories found will be searched.
space separated list of strings
blank
server_enforced_kb_lock
This setting determines whether the provisioning parameters received via
OCS inband provisioning are mirrored on the phone. These are:
ucEnforcePinLock -> setting enable_keyboard_lock
ucMinPinLength -> setting min_pin_length
ucPhoneTimeOut-> setting keyboard_lock_timeout
on, off
on
service_mode_login
With this setting, you can specify the username for the service mode login.
Together with the setting service_mode_password, it provides an
additional maintenance account apart from the administrator login.
Note: This setting should be provisioned with read-only permission.
342
Back to Contents