Sip/Rtp Tab - VTech ET685 Administrator And Provisioning Manual

Setting
Audio indication for
Dialog Info pickup
Audio Device Indicator
Send silent RTP packets
on mute
Audio parameters
Handset AGC
Headset AGC

SIP/RTP tab

With the SIP/RTP tab, you can configure the phone's SIP, RTP, and multicasting settings.
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Plays an acoustic indication when a call pickup is available.
In order for this to work, the setting callpickup_dialoginfo
has to be switched on in advance. (until firmware version
8.7.2.x) In firmware versions > 8.7.2.x
goto_monitor_state_on_line_activity needs to be enabled in
order to activate acoustic pick up indication.
This only works when there are no active calls.
Removed with 8.7.5 and replaced by value
'CallForPickupAvailable:10/2' in the new setting
status_msgs_with_audio_indication.
With 8.7.5 the setting goto_monitor_state_on_line_activity
isn't anymore required for the audio indication.
Show the currently active audio device in the display.
Setting this to on will allow RTP packets to be sent even on
mute, although they will be silent because of the
microphone mute. Turning it off will block the RTP packets
altogether on microphone mute.
This setting contains necessary parameters for soundcards
(in this special case USB headsets). For more information,
see parameter
"soundcard_event_map" on page
Turn this setting off to disable the Automatic Gain Control
(AGC) of the handset.
Turn this setting off to disable the Automatic Gain Control
(AGC) of the headset.
154
357.
Back to Contents