VTech ET685 Administrator And Provisioning Manual page 398

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Usually each received sdp-packet has a version number that identifies it.
When receiving the same version again the phone can ignore it. However
this versioning mechanism does not work reliably with all PBX'es so we
introduced the option to keep the phone from checking the version. When
version check is off, the phone will compare the entire sdp instead (except
for the version).
When setting user_server_type to nortel, ocs or broadsoft ->
version-check will be disabled automatically.
on, off
on
user_send_local_name
When this option is enabled, the phone receiving a SIP INVITE message
adds the display name of the called identity to the reply message in order
to allow the calling party to show this information on its display.
on, off
off
user_server_type
To enable PBX specific interoperability features you may specify the
proper server type matching your PBX environment.
Default , Asterisk (since 7.3.10), Bria (custom solution for Telekom
Austria), Broadsoft, CCM, MetaSwitch, Nortel, OCS/UC, PBXnSIP,
snomONE (since 8.7.3.15), Sutus BC (since 8.7.3.15), Sylantro, Telepo,
Teles
Default
user_shared_line
If you have to share your extension (identity) with somebody else, this has
to be enabled.
on, off
off
user_sipusername_as_line
398
Back to Contents