VTech ET685 Administrator And Provisioning Manual page 146

Setting
Peer to Peer Call
Completion
IDNA (RFC 3490)
Support
Auto Dial
Overlap Dialing
Number Guessing
Number Guessing
Minimum Length
Contact Query Minimum
Length
Block URL Dialing
Challenge Response on
Phone
Type of Intercom
Answering
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Disable it if call completion is handled by the SIP proxy.
Otherwise the phones are handling it directly between each
other.
Switch on support for Internationalizing Domain Names in
Applications (IDNA). IDNA support is the ability to handle
domain names including international special characters.
This setting is switched off by default. You can set a timeout
after which a number is dialed automatically without
pressing or taking the handset off the hook. Note: Apart from
the predefined values in the drop-down form, you can set
other values either through provisioning or single HTTP
GET requests.
If the connected SIP proxy supports this function, it can be
enabled here. This will lead to the phone starting to dial each
time a digit is entered and the SIP proxy replying with
„Number incomplete" until such time as the number has
been entered and the call can be initiated successfully
without the enter key having to be pressed.
With this setting, the number guessing functionality can be
enabled. This is the automatic number completion which will
begin after you have entered the minimum number of digits.
Specify the minimum number of digits that must be entered
before 'Number Guessing' will begin. Since firmware
versions 8.2.9 and 8.3.3, this setting also defines when
ldap-lookup should begin when entering a number.
Minimum number of chars required before starting the query
(LDAP, ABS, ...)
You can block the dialing of SIP URLs by turning this setting
on. In this case only numeric numbers will be allowed as
input.
VTech phones can handle challenge responses on the
phone. Turning this setting off will disable this feature and
you will only be able to handle authentication through the
web interface of the phone.
If the Alert-Info header is taken into account in order to allow
auto answering behaviour like intercom, this option can be
used to specify whether the phone answers in handset,
headset, or handsfree Mode. Also see Auto Connect Type
146
Back to Contents