VTech ET685 Administrator And Provisioning Manual page 247

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blank
fwd_all_target
The redirection target, when redirection is always active (setting
fwd_all_enabled).
SIP URI or number
blank
fwd_busy_enabled
If turned on and a call is in progress while a 2nd one is incoming, the
second caller is diverted to the number specified. Note: This will only work
if call waiting is disabled.
Diversion can either be handled by the phone or by a server, see setting
using_server_managed_fwd_busy.
on, off
off
fwd_busy_off_code
If the PBX is handling the redirection, it can be specified which star code
disables this functionality at the PBX for the specific identity.
starcode
blank
fwd_busy_on_code
When set, the given starcode, appended by the redirection target, will be
dialed whenever redirection when busy gets enabled or changes the target
for the specific identity.
starcode
blank
fwd_busy_target
247
Back to Contents