VTech ET685 Administrator And Provisioning Manual page 115

Setting
Password
Registrar
Outbound Proxy
Failover Identity
Authentication
Username
Mailbox
Conference Server
Ringtone
Custom Melody URL
Display text for idle
screen
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
This is the password to be used for challenge responses. In
order to protect them from unauthorized use, passwords are
not displayed in their true form, but as a series of asterisks.
Specify the IP or DNS address of the registrar/proxy where
you want to register this account. After a successful
registration, the registrar knows how to reach this specific
identity and can route requests (for example, incoming
calls) from other registered parties to this phone.
Specify the outbound proxy in this field (format: addr:port)
to ensure all SIP packets are sent via the specified
communication point.
This identity will be used as a backup for failover. That is, if
the current identity is not registered, this identity is used
instead.
Registrar environments may need different user names for
registration and authentication. If user_pname is set, it is
used for authentication and user_name is used for
registration; otherwise Account is used for both.
If you have set up a mailbox, specify the account name for
that mailbox here to associate it with this particular SIP
identity. This is important for contacting your mailbox when
the MWI message does not include the proper mailbox SIP
URI.
Contains a sip-uri for a conference room. Used by pressing
conference keys. This setting depends on an identity. If
'conference' key was pressed, the configured conference
room of the active identity will be called. If no SIP-URI is
configured, the default behaviour is a local conference on
the phone (min. 2 participants connected).
Select a ring tone that will alert you when a call comes in
for this particular identity.
Specify an URL to your own ringing melody. The type of file
that should be supplied to the phone is: „PCM 8 kHz 16
bit/sample (linear) mono WAV". This only has an effect
when you have chosen "Custom Melody" from the
"Ringtone" pull-down menu and when the incoming call
matches this SIP identity.
If you enter a name in this field, then this name will be shown
on the idle screen associated with this particular line instead
of the name you have entered in the Displayname field, if
any. This information is not sent out to anyone, but is merely
shown on the phone's display for your information.
115
Back to Contents