VTech ET685 Administrator And Provisioning Manual page 387

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
This setting enables support for the hookflash feature on Broadsoft's
Broadworks servers. When enabled the phone will process incoming INFO
messages with a content type of 'application/broadsoft' for call waiting
indication. Additionally, when the line key is pressed in the connected
state, a hookflash event is sent to the server inside an INFO message. This
occurs in lieu of the hold action which is usually invoked when this feature
is disabled.
on, off
off
user_event_list_uri
The subscription URI for monitoring the dialog states of a number of
extensions setup at the PBX. This setting and
user_event_list_subscription (until < 8.7.3, as of 8.7.3 simply filling this
setting (user_event_list_uri) turns on the mechanism) cause the phone to
send a single subscription even for monitoring multiple extensions. The
associated NOTIFY contains the extensions configured at the server for
the user and their respective status if it active.
As of 8.7.3 when filling this setting with a simple sip-uri or number in the
WUI, it will automatically be replaced by a complex XML-configuration that
allows to auto-assign the received buddies onto keys of type Contact List
Buddy.
URI or XML sub trees
blank
user_expiry
The proposed expiry time of the registration in seconds for line x. Upon
expiration of the registration, the phone will send a fresh re-registration
request.
Integer
3600
user_failover_identity
This identity will be used as a backup for failover i.e. if the current identity
is not registered, this identity is used instead.
none, 1, 2, 3, 4
387
Back to Contents