VTech ET685 Administrator And Provisioning Manual page 34



Setting with index 0 describes the format of the upper left key on the first ET6
attached on phones without self-labeling keys. On phones with self-labeling keys,
0 describes the format of the first key on page 1.
perm string defines the permission flag. See

value string defines the function key value, optionally followed by a space and a

value-specific argument. As of firmware versions 8.2.19 and 8.4 and above, XML
subtrees can be used instead.
List of valid values of the value string
The following table lists the available values for the value string.
Provisioning
the destination configured on the key is inserted
$type will insert the key type
$state will insert the key state, when applicable (not all keys have states)
value string Description
Enables you to switch Auto Answer functionality on/off
auto_answer
for the first outgoing identity. If you don't provide the
identity, the auto answer functionality is switched for all
identities.
Busy Lamp Field (BLF). Enables users to monitor the
blf
dislog state of another phone/user extension. This is
indicated by the LEDs adjacent to the particular key.
This is a button that is connected to your PBX.
button
BroadWorks Automated Call Distribution (ACD)
BW-ACD
configuration.
BroadWorks Anywhere configuration.
BW-Anywhere
BroadWorks Remote Office configuration.
BW-RemoteOffice
Broadworks Busy Lamp Field (BLF) configuration.
BW-ServerBLF
The phone can be used as a Call Agent that
call_agent
distinguishes five states:
These states are governed by the function key ACD,
which is configured in the Function Keys section of the
webinterface.
ET685 Administrator and Provisioning Manual
"Flags" on page
AgentLoggedOnEvent (Sign-In)

AgentLoggedOffEvent (Sign-Out)

AgentNotReadyEvent (Unavailable)

AgentReadyEvent (Available)

AgentWorkingAfterCallEvent (Wrap-Up)

34
51.
Back to Contents