VTech ET685 Administrator And Provisioning Manual page 350

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Defines a certain SIP Response code and reason phrase for Invite
requests. It allows you to force a registration with an invite response.
Never use this option unless you exactly know what you are doing! Do not
interfere with existing response codes and their handling!
If the phone receives that response for an Invite request, it
- acknowledges the response
- initiates an registration against the response sender
- on successfull registration restart the Invite request to the response
header
<response code><space><response phrase>[<pipe><response
code><space><response phrase>...]
blank
sip_force_sendrecv_on_invite_wo_sdp
INVITE Requests without SDP should not change the state of the SDP.
However, some servers can not handle this and need a sendrecv in the
response whatever the previous state was. If on, the phone sends
sendrecv in the response for INVITE Requests with no SDP.
on, off
off
sip_health_check
350
Back to Contents