VTech ET685 Administrator And Provisioning Manual page 311

Description:
Values:
Default:
Setting:
Description:
Values:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
The phone receives RTP packets destined for this multicast IP address
and port and plays them out.
Starting at version 8.7.3.26 you can setup the multicast address with
additional options:
speaker=(0|1):
If this option is set and value is 1, then the multicast audio will be played
always over speaker. If value is 0, then the current audio device will be
used. If this option is not set, then value 0 is used as default value.
interrupt=(0|1):
If this option is set and value is 1, then the multicast audio interrupts a
running call. If multicast is finished, then the interrupted call continues. If
value is 0, the multicast audio will only be played in idle state. If this option
is not set, then value 0 is used as default value.
volmax=(0|1):
If this option is set and value is 1, then the maximal volume will be used for
multicast audio. If value is 0, then the current volume will be used. If this
option is not set, then value 0 is used as default value.
priority=(0..10):
This option sets the priority of the multicast address. You can choose a
priority between 0 and 10, where 0 is the lowest and 10 the highest priority.
If the phone receives multicast from more than one configured port, then
the multicast with the highest priority will be played. If they have the same
priority then the multicast will be played, that was received first. If this
option is not set, then a priority of 5 is used as default.
Valid multicast IP and port or a comma separated key-value string with IP
and port and optional parameters
blank
min_pin_length
Determines the minimum length that a PIN must have. A value of 0
indicates that a PIN is not required. If the length of the currently configured
PIN is less than the value of this setting, the user will be prompted to create
a new PIN which meets this requirement at the first attempt to manually
lock or unlock the keyboard. On OCS servers this setting is provisioned via
inband provisioning parameter ucMinPinLength, but only if its value is
greater than the setting's current value.
Integer, or blank
311
Back to Contents