VTech ET685 Administrator And Provisioning Manual page 35

Provisioning
value string Description
Press the key to set up a conference call and select
conference
desired participants.
Let the key reflect one of the buddies from a
Contact List
resource-list-subscription.
Buddy
Extension/destination. This key type is used for:
dest
This option allows the specification of arbitrary key
dtmf
sequences (allowed digits: "0-9", "*", "#", "A-D" and
flash: "!"), which will be sent via DTMF when this
button is pressed. This can only be done during an
active call.
Pressing the key bound to "Intercom" enables the
icom
intercom mode: the phone will be directly connected to
the VTech phone if authentication is set up properly.
This feature is useful in an office environment as a
quick access key to connect to the operator or the
secretary.
The argument is a number that is dialed on key press
ivr
i.e. sending out an INVITE. Once the call has been
established, pressing the same IVR key would send
out dtmf digits comprising that number. This can be
used to control IVR applications by one key only.
Key events than can be mapped onto the predefined
keyevent
or the usual function keys.
Use the text
of the key events in
page
ET685 Administrator and Provisioning Manual
Extension Monitoring (Busy Lamp Field (BLF))

& Call Pickup: This allows showing the status
(idle, ringing, held call, busy) of a distinct
phone extension on your phone
Speed Dial: Pressing this key during idle state

will dial the programmed extension ("number").
Call Deflection: Pressing this key during an

incoming call will deflect the incoming call to
the programmed extension ("number").
followed by a space, and one
keyevent
"List of valid key events" on
37. Example:
keyevent F_ADR_BOOK
35
Back to Contents