VTech ET685 Administrator And Provisioning Manual page 295

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blank
ldap_display_name
This setting specifies the format in which the name of each returned search
result is to be displayed on the VTech phone. The setting allows
combinations of various name attributes along with special characters.
LDAP name attributes
blank
ldap_max_hits
This setting specifies the maximum number of search results to be
returned by the LDAP server. Please note that a very large value of the
Max. Hits will slow down the LDAP lookup, therefore the setting should be
configured according to the available bandwidth. The default value for this
setting is 50.
1 - 200
50
ldap_name_attributes
This setting can be used to specify the name attributes of each record
which are to be returned in the LDAP search results. This setting
compresses the search results, as the server only returns the attributes
which are requested by the VTech phone. The setting allows the user to
configure multiple space separated name attributes. Please consult your
system administrator regarding which name attributes are to be
configured.
space separated LDAP name attributes
blank
ldap_number_attributes
295
Back to Contents