VTech ET685 Administrator And Provisioning Manual page 305

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
A group of 3 or 4 numbers, each >=0 and <=255. First number is the red
value, followed by green, blue and optional alpha (alpha will default to 255
if it is not set).
226 226 226 255
lldp_asset_id
LLDP asset ID
VTechET685
lldp_reboot_timeout
This setting defines the amount of time in seconds that a reboot should be
deferred after a new network policy has been published via LLDP. This
helps to avoid continuous reboot loops in network environments where
new network devices are first put into a retention VLAN and after
successful authentication gain access to their designated production
VLAN (e.g. voice VLAN).
Note: The default value of 60 seconds seems to be a reasonable value to
grant enough time for the authentication process to complete, or a fallback
mechanism (e.g. MAC Authentication Bypass (MAB)) to take place.
Integer
60
location_template
305
Back to Contents