VTech ET685 Administrator And Provisioning Manual page 202

Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
cache_contact_details
This parameter is used to deactivate the caching of specific contact
details beyond call boundaries. When set to "off", subsequent calls from
the same contact (determined by the SIP URI) do not use cached contact
details.
Note: Currently, only the display name is affected by this setting.
For server type Broadsoft, the default is "off".
on, off
on
cache_sip_authorization
When this setting is set to 'on', the phone will cache the 'nonce', 'qop',
'opaque' and 'realm' parameters from the initial challenge, as well as the
user credentials, and present unbidden an Authorization header (or
Proxy-Authorization, depending on the challenge it received) calculated
from these cached credentials in the next request it sends on the same
identity. The nonce count is incremented on each subsequent message.
The server may send a 'nextnonce' in the (Proxy-)Authentication-Info
header of the response. The phone will replace the cached nonce with the
value of the 'nextnonce' parameter and reset the nonce count. When this
setting is set to 'off' the phone will not include any credentials in the next
request and must be re-challenged by the server if continued
authentication is desired.
on, off
on
call_completion
Turning this setting to "on" will prompt the user to activate call completion,
if possible, while calling a number. When the called party becomes
available again, your phone will be able to automatically redial the
number. CCNR (on not reachable) as well as CCBS (on busy) is
supported.
on, off
off
call_join_xfer
202
Back to Contents