VTech ET685 Administrator And Provisioning Manual page 183

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Time in miliseconds during which repeated ACKs on retransmitted
200-OKs will be blocked, i.e. not send.
0 disables this behaviour.
Time counts from the first ACK the phone sends.
These sort of retransmittions only occur in udp connections.
This setting only works for the reinvite-ping-pong caused by a
hold-state-change originating from your phone. I.e.:
1) you press hold to place the person you are talking to on hold.
2) your phone sends reinvite to do so
3) pbx sends one or more (thru retransmittion) 200-OKs
4) your phone answers the first 200-OK with ACK and will refrain from
sending any further ACKs (to any retransmitted 200-OKs) for the time set
with this setting.
positive integers
0
action_attended_transfer
This event will be triggered on the phone (A) which received the REFER
message during an attended transfer. Usually this is the calling party (A),
while B is the called party, that performed the transfer and C is the party
the call is transferred to. Compare this SIP call flow. In this case, a web
GET to the specified URL is performed.
HTTP URL
blank
action_blacklist_url
The action blacklist url HTTP request is triggered when a call is received.
If the HTTP server of the configured url answers with 200 OK, then the
caller is processed as remotely blacklisted and the phone silently rejects
the call. In case the server answers with an error, the call is accepted and
the phone is ringing. In case it takes too long for the answer, the call should
be accepted. This timeout can be configured with the setting
remote_blacklist_action_timer.
The blacklisting can be done via an Action URL, e.g.:
action_blacklist_url=http://myserver.com/blacklisted?caller=$remote
HTTP URL
blank
183
Back to Contents