VTech ET685 Administrator And Provisioning Manual page 110

Type
Multicast Page
Park+Orbit
Presence
Push2Talk
Speed Dial
Starcode
Transfer to
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Supports paging via multicast IP.
Set up the function key to generate a multicast stream.
This feature is useful for call center environments and all
places where there is a great inflow of calls and some kind
of queuing is required to manage them. Some PBX
solutions provide its customers with the opportunity to set
up parking orbits, where calls can be parked and picked up.
The option "Park Orbit" enables the phone to provide this
feature.
The phone will subscribe to the presence state of the
destination URL with event type presence. The associated
led will reflect the presence state of the destination e.g.
ringing, available etc. Hitting the programmable key
(usually when the destination is available and can receive a
call) shall dial that number.
Just like the Intercom option, the 'Push2Talk' feature
enables users to make Intercom calls to a programmed
destination via the function keys. This feature differs from
the 'Intercom' option only in the sense that for this feature
the intercom call will remain active as long as the
programmed key is kept pressed. The call will be released
as soon as the the 'Push2Talk' programmed key is
released. This feature is particularly useful for group
annoncements.
This key type behaves as a shortcut to a preset number the
user may want to dial. In opposite to key type
extension/destination, this key type does not subscribe to
Dialog State changes. It is designed to speed up dialing
numbers often used or hard to remember. A DTMF
sequence can be appended that is dialed once the call has
been established. A Comma represents a pause of one
second. Normally, the number is dialed immediately after
the function key is pressed. In some circumstances, this
behaviour is not desired. e.g. if you place a prefix on the
function key. In this case, pass number=incomplete as an
argument.
Making SIP calls without audiovisual indication on the
phone user interface (PUI).
Select Starcode from the Type drop-down menu of

the function key.
Enter the phone number, star code number, or SIP

URI in the Number text field of the function key.
Press the key to transfer a call to the specified extension.
110
Back to Contents