VTech ET685 Administrator And Provisioning Manual page 275

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Configures the IPv4 conflict detection module according to RFC 5227.
Normally there is no need the change the default behaviour.
- detect_defend: the phone detect possible conflicts before using the
selected IPv4
- address and after using it defends the address via arp announcements.
- detect_only: the phone detect possible conflicts before using the selected
IPv4 address only
- defend_only: the phone defends the address via arp announcements
only
off: the IPv4 conflict detection module is disabled.
Changes to this setting will only affect after a reboot of the phone.
off, detect_only, defend_only, detect_defend
detect_defend
is_voice_identity
When this is disabled, invites for audio-calls will not be accepted by this
identity. A non-voice-identity will automatically force setting hide_identity to
be enabled.
on, off
on
keepalive_interval
Specifies the number of seconds after which a new keepalive message will
be sent out to the Registrar/Proxy port in order to have the port stay open
and the phone remain reachable.
Integer
blank
key_0_remapped
275
Back to Contents