VTech ET685 Administrator And Provisioning Manual page 197

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Setting has been introduced to select between two different call transfer
behaviours.
Consider the following flow:
A calls B
B picks up
A and B converse (A and B have an confirmed dialog)
...
B puts A on hold
...
B calls C
C is ringing, but does not yet pick up (B and C have an early dialog)
B transfers A to C:
B sends C a CANCEL (only if attended_transfer_on_ringing = off
[old behaviour])
B sends A a REFER without replaces.
A sends an INVITE to C
...
A and C converse
So, setting this value to "on" will avoid the CANCEL request and thus
avoiding a possible "missed call entry" in some environments on party C.
on, off
off
audio_device_indicator
Show the currently active audio device in the display.
on, off
on
auth_tmp_pass
Internal
This setting holds temporarily used data which should not be set or
changed by any means. This setting cannot be provisioned.
Do not change the vaue of this setting.
empty
197
Back to Contents