VTech ET685 Administrator And Provisioning Manual page 139

Setting
IP address
Netmask
Host Name
IP Gateway
Wlan:
AuthMode
Wlan Ethernet Bridge
DNS:
Domain
DNS Server 1
DNS Server 2
Time:
NTP Time Server
NTP Refresh Time (sec)
Timezone
HTTP:
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
You can change the IP address of the device through this
setting. This parameter is mandatory in order to enable the
Ethernet connection.
Change the netmask for the device.
Change the hostname of the phone here. If set, the
hostname is used to sign syslog packages and as the title of
the webinterface webpages.
This setting shows the IP address of the default IP gateway
(NOT the VoIP gateway). It is the address to which the
packets get routed when the desired packet address is not
in the current subnet. Setting up this parameter is
mandatory in order to reach an external network.
Selects WiFi Authentication Mode
When this setting is set to on, a bridge between the WLAN
port (Stick) and PC port will be made. This feature allows
you to connect a second device over the phone to a wireless
network.
Specify the DNS domain for your phone here. This
parameter is mandatory in order to enable DNS searching.
Specify the IP address of the DNS server for your network
here. This parameter is extremely important for a proper
functioning phone, so please make sure it is set up correctly.
Specify the IP address of a backup DNS server for your
network here.
Specify the domain name / IP address of the NTP server
here.
The interval after the phone will re-synchronize the time
from the NTP server, in seconds.
Select the time zone of your geographical location through
this option.
139
Back to Contents