VTech ET685 Administrator And Provisioning Manual page 319

Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
overlap_dialing
If the connected SIP proxy supports this function, it can be enabled here.
This will lead to the phone starting to dial each time a digit is entered and
the SIP proxy replying with Number incomplete until such time as the
number has been entered and the call can be initiated successfully without
the enter key having to be pressed.
on, off
off
pair_tcp_relay_only
When enabled, this setting causes only local TCP relay ICE candidates to
be paired with remote TCP relay candidates, and thus prevents local TCP
host candidates from being paired with remote TCP relay candidates.
on, off, true, false
off
partial_lookup
When this option is set to 'on', the phone tries to match parts of the
incoming call number to numbers stored in the address book displays the
name belonging to the first number that matches partially.
Since V8.7.4 an integer value can be set too. If the value of the setting is
n and n > 0, the phone sends a query to the LDAP server or to the internal
address book. It matches with entries that end with that postfix of lenght n.
on, off
off
pbx_buttons
This setting allows for sending a message containing a button name to
your PBX whenever the handset is placed on hook. For this to work, you'll
need to set up one of your line keys (for example P1) as type button, with
the number-field set to "message". The PBX will have to set up the number
where the message should be sent to.
on, off
off
319
Back to Contents