VTech ET685 Administrator And Provisioning Manual page 364

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
We reintroduced a STUN keep-alive mechanism for SIP, which can be
turned on manually by specifying the address of the STUN server followed
by the port number. However, we strongly discourage you from using it,
because it can not work properly in symmetrical NAT environments (i.e.,
linux-based router/firewall). The only general SIP NAT solution is a session
border controller (SBC) on the service provider's side.
IP Address:Port
blank
stutter_timeout
In alphanumeric edit mode the cursor changes after this is the time.
Pressing a phone key twice or more in less then this timeout the key value
changes to the next character.
E.g.: Timeout set to 300: Press '2' - wait 200ms - press '2' - wait 500ms -
press '2'. Result will be 'ba'.
integer
1000
subscription_delay
Selects a random number around the given value in seconds to send
delayed batch subscriptions. Useful at bootup for certain servers. Its not
set by default.
integer
0
subtext_color
Defines the color used for subtexts.
A group of 3 or 4 numbers, each >=0 and <=255. First number is the red
value, followed by green, blue and optional alpha (alpha will default to 255
if it is not set).
123 124 126 255
support_idna
364
Back to Contents