VTech ET685 Administrator And Provisioning Manual page 273

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
The number of keep-alives the phone should send out at the beginning of
an RTP session. A keep-alive is an empty STUN Binding Request and
serves to open a pin hole in the firewall. The phone sends one keep-alive
by default, i.e. when the setting is empty. This is for backward compatibility.
Set this to zero if you want no keep-alives. Note that if the phone receives
such a Binding Request, it will answer it with a Binding Response.
0 - 256, blank
blank
intercom_connect_type
If the Alert-Info header is taken into account in order to allow auto
answering behaviour like intercom, this option can be used to specify
whether the phone answers in handset, headset, or handsfree Mode. See
also setting auto_connect_type.
intercom_connect_type_ handsfree, intercom_connect_type_headset,
intercom_connect_type_handset
intercom_connect_type_handsfree
internal_ringer_file
Melody to be played back on the Internal Ringer Text.
Ringer1, Ringer2, Ringer3, Ringer4, Ringer5, Ringer6, Ringer7, Ringer8,
Ringer9, Ringer10, silent
Ringer1
internal_ringer_text
Text which can be specified in Alert-Info to categorize a specific ringtone
melody.
String
blank
ip_adr
You can change the IP address of the device through this setting. This
parameter is mandatory in order to enable the Ethernet connection.
273
Back to Contents