VTech ET685 Administrator And Provisioning Manual page 237

ET685 Administrator and Provisioning Manual
Description: This setting is used to configure the PC port of the phone's integrated
Ethernet switch. The setting value is a comma-separated list of three
items: <speed>,<pause>,<advertisement>
Whereas each item has the following meaning:
<speed> - setting forced Ethernet speed or enabling auto-negotiation
<pause> - enable Ethernet flow control via PAUSE frame (empty value
leaves the feature disabled)
<advertisement> - space-separated list of properties to advertise (empty
advertises all supported properties)
For example, the following setting value would auto-negotiate the Ethernet
speed, while leaving the pause feature untouched (empty value between
the two commas) and advertising that only 1000MBit and 100MBit full
duplex can be auto-negotiated:
auto,,auto 1000full 100full
Note: The values 1000full and 1000half are only supported by phones with
an integrated Gigabit Ethernet switch.
Configuration File Parameter Guide 237
Back to Contents