VTech ET685 Administrator And Provisioning Manual page 143

Setting
Debug:
Syslog Server
LCServer
SIP Trace
SIP Trace for
REGISTER/SUBSCRIB
E/NOTIFY
SIP Trace Size (Number
of Messages)
Truncate SIP Body to this
Size (in Bytes)
SNMP:
Port
Trusted Address
IPv6 settings
To display these settings, go to the Advanced page > Network tab, and click
More Controls under the Network area.
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Type in the host where a Syslog Server is running to store
the log messages coming from the phone.
Type in the IP address of the remote LCServer if you want
your phone to connect to it. Usually, you do not need to
make an entry here.
Switches SIP tracing on or off.
Set to 'off' when you do not want to log REGISTER-,
SUBSCRIBE-, NOTIFY- nor SERVICE-SIP-messages in
WUI-sip-trace.
Determines the number of messages to keep in the trace.
Once this number is reached, the oldest message is
removed when a new on is added. If you want to trace only
to a USB device (see usb_storage_siptrace), you may set
this value to zero.
This setting determines how many bytes of the original body
to keep in the trace. If you don't want the body to be
truncated at all, set this setting to -1 (messages written to a
USB storage device (see usb_storage_siptrace) are never
truncated, irrepective of the value of this setting).
Type in the port to be used for SNMP communication.
Specify the address range (in CIDR notation) solely from
within which subnet SNMP requests will be accepted
e.g. 192.168.0.0/16
143
Back to Contents