VTech ET685 Administrator And Provisioning Manual page 404

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
on, off
off
using_server_managed_fwd_time
If this setting is "on" the server will be responsible for handling the redirect
on timeout functionality. From the call perspective the phone will act as if
no redirect was set (all is managed by the server).
since 8.7.4:
The PUI will show the current setup if the server synchronizes it's values
with those on the phone (settings fwd_all_enabled, fwd_all_target and
fwd_time_secs). This setting does not specify how the server changes the
redirection values nor how the phone updates them. (it may be done via
TR69, DFKS or starcodes).
Before 8.7.4:
The phone user will see the value from settings
server_managed_fwd_time_state, server_managed_fwd_time_nr and
server_managed_fwd_time_secs as the current redirect on timeout state,
and this value can be changed at anytime by the server.
This setting does not specify how the server changes the value of settings
server_managed_fwd_time_state, server_managed_fwd_time_nr and
server_managed_fwd_time_secs nor how the phone updates them (it may
be done via TR69).
on, off
off
utc_offset
SYSTEM INTERNAL
Signed UTC offset in seconds. This value is retrieved automatically from
the timezone configuration. Usually there will be no need to change this
setting.
Integer
blank
uxm_count
404
Back to Contents