Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for VTech ErisTerminal ET605
Summary of Contents for VTech ErisTerminal ET605
- Page 1 ErisTerminal SIP Deskset ® ET605 User Guide...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important information ....................8 SELV (Safety Extra Low Voltage) compliance ..............12 Cleaning ...........................12 Setting up the phone ...................... 13 Delivery Content ......................13 Attaching and detaching the footstand ................13 Attaching ........................13 Detaching ........................13 Rotating the tab of the cradle ..................14 Wall mounting .........................14 Connecting the phone .....................15 Connecting a wired headset ....................16... - Page 3 Settings available in user mode ................31 Settings available in administrator mode ............32 Display backlight and contrast settings ..............33 The phone's web interface ....................35 Opening the web interface ..................35 How the web interface works ..................36 Web settings overriding manual phone settings ..........36 User mode/administrator mode ..................37 Directories ........................
- Page 4 Headset ......................49 Speakerphone ....................49 Handset or headset and casing speaker ............50 Using different dialing methods ...................50 Auto dial ......................50 Redialing ......................50 Calling number from call history (missed, received, dialed calls) ......50 Calling number from phone directory ...............50 Calling number from external directory.............51 Speed dialing ......................51 Calling emergency numbers................51 Call completion ....................51...
- Page 5 Turning forwarding of all calls on/off with a programmable function key ....63 Configuring the function keys ..................64 Programming the function keys ..................66 Example 1, Extension monitoring and call pick-up .............67 Example 2, Changing the setting of a context-sensitive key ........68 Customizing the phone settings ..................
- Page 6 Preparing the phone for wall mounting ................87 Measurements ........................88 Appendix 4 - Programmable Functions................89 Freely programmable functions ..................89 Key Events .........................93...
- Page 7 Introduction Congratulations on your purchase of this VTech product. Before using this product, please read "Important information" on page 8 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your product. You can also visit our website at businessphones.vtech.com...
-
Page 8: Important Information
ET605 User Manual Safety, Disposal, Cleaning of Product mportant information This symbol is to alert you to important operating or servicing instructions that may appear on the product or in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. - Page 9 ET605 User Manual Safety, Disposal, Cleaning of Product D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation.
- Page 10 14. Débranchez cet appareil de la prise de courant et communiquez avec le département de service à la clientèle de VTech dans les cas suivants: A. Lorsque le cordon d’alimentation est endommagé ou écorché. B. Si du liquide a été échappé dans l’appareil.
- Page 11 ET605 User Manual Safety, Disposal, Cleaning of Product D. Si l’appareil ne fonctionne pas normalement en suivant les directives du guide. N’ajustez que les commandes couvertes dans le guide d’utilisation, car un mauvais réglage de celles-ci peut être à l’origine de dommages, ce qui nécessiterait des réparations considérables pour remettre l’appareil à son état de fonctionnement normal.
-
Page 12: Selv (Safety Extra Low Voltage) Compliance
ET605 User Manual Safety, Disposal, Cleaning of Product FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 13: Setting Up The Phone
ET605 User Manual Setting up the Phone etting up the phone elivery Content - Base phone unit Quick Installati on Guide - Footstand ET605 - Handset - Handset cord - Ethernet cable - Quick Start Guide SILKSCREEN ARTWORK | ET605 Rosalyn Chun | 31 May 2018 | vision 2 ttaching and detaching the footstand The footstand has four snap-fits, two narrower and longer ones and two wider and shorter ones. -
Page 14: Rotating The Tab Of The Cradle
ET605 User Manual Setting up the Phone otating the tab of the cradle The phone is delivered with the tab level with the inner edge of the cradle (Fig. 1). If you are going to mount the phone on a wall, we recommend that you rotate the tab 180° around its vertical axis. After rotation, the tip of the tab (Fig. -
Page 15: Connecting The Phone
5V DC The phone can be operated with Power over Ethernet (PoE) provided via the network cable or, if PoE is not avaible in your network, with separately available 5V DC VTech power adapter, model number VSP-PWR2000. • Plug the Ethernet (network) cable into the RJ45 connector labeled “NET”, and plug the other end into the network side to establish a data link. -
Page 16: Connecting A Wired Headset
"Identities/accounts" on page 69. Initialization VTech phones are plug-and-play. Once the phone is connected to your network, it will begin to initialize. Note: Normally the initialization is completely automatic, using DHCP. If the phone cannot discover a DHCP server in the subnet, you will be asked: Are you using DHCP? If your network... - Page 17 ET605 User Manual Setting up the Phone 2. Next, you will be prompted in the language of your choice to select a time zone. This affects the time shown on your display. Fig. 1 Fig. 2 Fig. 3 ◦ Press on the navigation key to move up or down the list one item at a time.
-
Page 18: What To Do If Initialization And Registration Are Unsuccessful
What to do if initialization and registration are unsuccessful Your network or your VoIP provider may require more login data than requested by the VTech phone during the initialization and registration process. This data is entered on the web interface of the phone. Contact your network system administrator or your VoIP provider for more information. -
Page 19: Correcting The Clock
ET605 User Manual Setting up the Phone Correcting the clock The phone receives the time and date from your NTP time server. If the time and/or date on the display are incorrect, you may need to set the correct time zone. •... -
Page 20: Getting To Know Your Phone
ET605 User Manual Getting to Know Your Phone etting to know your phone t a glance The factory settings at a glance: Call LED • Blinking fast: Incoming call Outgoing • Steady light: Busy or missed call identi ty: • Blinking slowly: Call on hold Handset earpiece Display - idle screen... - Page 21 ET605 User Manual Getting to Know Your Phone Navigation keys • Confi rming, saving acti ons & input, and • Canceling acti ons & input, and returning to previous screen returning to previous screen • Accepti ng calls on speakerphone and in •...
-
Page 22: Led Indicators
Call forwarding. For more information, see "Call forwarding" on page 60. Help menu with phone's IP address and VTech web page URL is replaced by info menu new status information (call forwarding active, passwords not set, missed calls, etc.) is... - Page 23 ET605 User Manual Getting to Know Your Phone When other functions are mapped onto the keys, the LEDs may glow or blink. For example: When the "extension" function has been mapped onto a key and monitoring of extensions is enabled on both phones, the LED will: •...
-
Page 24: Hard Keys
ET605 User Manual Getting to Know Your Phone ard keys Context-sensitive, programmable function keys These function keys can be programmed on the "Function Keys" page of the phone's web interface with a number of key events; these functions will then be available when the phone is in idle mode. For more information, see "Configuring the function keys"... -
Page 25: Audio Control Keys
ET605 User Manual Getting to Know Your Phone Audio control keys • In call: Muting and unmuting the handset or casing microphone • On idle screen: Turning "do not disturb" (DND) on and off for all identities registered on the phone. In DND mode incoming calls do not ring; callers hear the busy signal. Exception: Phone numbers on your directory's VIP list (see "Contact Types"... -
Page 26: Alphanumeric Keypad
ET605 User Manual Getting to Know Your Phone Alphanumeric keypad Input modes and navigation Current audio mode ( , , ) Input modes: 123: Numerals abc: Lower case Input mode: numerals ABC: Upper case lett ers Delete character to the left of the cursor Redial Pool: Directory, LDAP, call lists... -
Page 27: Entering Numerals, Letters, Special Characters, And Symbols
ET605 User Manual Getting to Know Your Phone Entering numerals, letters, special characters, and symbols When entering letters and special characters, pause briefly after each character until the cursor has moved forward so that you won't overwrite the last character you entered. Pausing is not necessary when entering numerals. -
Page 28: Display Layout
ET605 User Manual Getting to Know Your Phone isplay layout In idle mode When acti ve Info bar/status Confi gured identi ti es Functi on key line Context-sensiti ve functi on key symbols Context informati on Fig. 1 In idle mode In idle mode, the display presents the following information: Info bar/status line •... - Page 29 Settings menu. See "Settings" on page 31. Forwarding all calls (on/off). See "Call forwarding" on page 60. Help menu with phone's IP address and VTech web page address. This key is replaced by the status info key when new status messages are available.
-
Page 30: When The Phone Is Active
ET605 User Manual Getting to Know Your Phone When the phone is active The display will inform you of any activity the phone is engaged in (see Fig. 1 on page 27). This information is presented in the form of text or symbols or both. Info/status bar. -
Page 31: Settings
ET605 User Manual Getting to Know Your Phone ettings A comparatively small number of settings can be adjusted on the phone; many more are available on the phone's web interface. Phone settings Press to open the settings menu on the display. To open submenus and settings, press their number on the alphanumeric keypad or scroll to the setting and press Settings available in user mode 1 Preferences... -
Page 32: Settings Available In Administrator Mode
ET605 User Manual Getting to Know Your Phone Settings available in administrator mode In administrator mode, all settings of the phone menu and on the phone's web interface are accessible. 1 Preferences 2 Call Features 3 Identi ty 4 Network 5 Maintenance 6 Informati on 1 Select Outgoing 1 Language... -
Page 33: Display Backlight And Contrast Settings
ET605 User Manual Getting to Know Your Phone Display backlight and contrast settings Backlight and contrast can be adjusted separately for the times when the phone is active and when the phone is idle. Lowering backlight intensity lowers the energy consumption of the device. The backlight when idle can be reduced to zero bars. - Page 34 ET605 User Manual Getting to Know Your Phone • Contrast 1. Press or the function key underneath , if the symbol is available. 2. Press Preferences (see Fig. 1, above). 3. Press Display. 4. Press Contrast. Fig. 5 5. Press the function key underneath the plus or minus symbol in the function key line (Fig. 3 and 4) to increase ( ) or decrease ( ) the contrast.
-
Page 35: The Phone's Web Interface
ET605 User Manual Getting to Know Your Phone he phone's web interface When you register the first account during the initialization of the phone, your SIP user name and password will be registered as the HTTP user name and password. If you wish to change them later, you can do so on the phone's web interface >... -
Page 36: How The Web Interface Works
ET605 User Manual Getting to Know Your Phone How the web interface works The vertical menu on the left side of the window is always the same, no matter which window happens to be open at the time. Available menu items depend on whether the phone is running in user or administrator mode. Click on a menu item to open that page. -
Page 37: User Mode/Administrator Mode
Getting to Know Your Phone ser mode/administrator mode VTech phones can be operated in administrator or user mode. In administrator mode, all settings are accessible and can be modified; in user mode, a number of settings are not accessible. The factory default is administrator mode. - Page 38 ET605 User Manual Getting to Know Your Phone In administrator mode, the two pages look like this: Fig. 3 Fig. 4...
-
Page 39: Directories
ET605 User Manual Directories irectories irectory The directory is the built-in directory of the phone. It can hold up to 1,000 entries. Entries can be added and edited on the phone and on the web interface. Any changes you make on the web interface will not take effect until you click on "Save" or on "Apply" and "Save", depending on your firmware version. -
Page 40: Contact Types
ET605 User Manual Directories Contact Types VIP: Calls from numbers with this contact type will ring on your phone even when DND mode is active. You can assign a ringtone to this contact type. If your VIP is also assigned to a group (see below) and if that group has a distinct ringtone, the ringtone assigned to the group will be played. -
Page 41: Adding/Editing Entries On The Phone
ET605 User Manual Directories Adding/Editing Entries on the Phone Adding new entry manually 1. Press to open the phone's directory. 2. Press 3. Enter the Telephone Number and press 4. Enter the First Name and press 5. Enter the Last Name and press Note: Entering a First Name and Last Name is optional. -
Page 42: Editing Existing Entry
ET605 User Manual Directories Editing existing entry 1. Press to open the phone's directory. 2. Selecting an entry: Press to scroll to the entry or enter the first letter of the name. 3. Press . The Details screen for the entry will be displayed. 4. -
Page 43: Adding/Editing Entries On The Web Interface
ET605 User Manual Directories Adding/editing entries on the web interface Click on Directory in the menu on the left side. Adding new entry 1. Type data in text fields of Add or Edit Entry. ◦ Number: Type the number exactly as you would dial it, with country and area codes, if necessary, and without parentheses, hyphens, blank spaces. -
Page 44: Editing An Entry
ET605 User Manual Directories Editing an entry When you open an existing entry, the current information is displayed in the text fields of "Add or Edit Entry" and two additional buttons, "Add Sub" and "Change", are available (see Fig. 2 and 3, below). •... -
Page 45: Deleting Entry On Web Interface
ET605 User Manual Directories ◦ John Miller's entry has a SIP number and a private number. In this example, his cell phone number will be added as a third number. Click on in the line containing John Miller's name. The data is shown in "Add or Edit" area. Enter the phone number in the text field of "Number". -
Page 46: Exporting Directory
ET605 User Manual Directories Exporting Directory To save your phone book content onto your PC or server, click one of the “Click here” links at the bottom of the Directory page. A new browser window opens to display your phone book content. Right-click this window, and select “Save Target As…”... -
Page 47: External Directories
ET605 User Manual Directories If you want to delete the existing phone book before importing, click on for the Delete whole directory before setting. Once satisfied with the preview, click Save to save the file contents to the phone book. After saving, the phone book could look like this: xternal directories Available if provided by your network, your VoIP provider, or another external source. - Page 48 ET605 User Manual Directories To dial a contact on the phone, enter the first letter of the name you are searching for. Type more letters if the name shown isn‘t the right one, or scroll through the list. Press to dial.
-
Page 49: Using The Phone
ET605 User Manual Using the Phone sing the phone This section describes the functions of the phone with the factory default settings. If your phone was installed and/or set up by someone else, the default settings may have been changed. Please check with that person or company if the phone does not react as described here. -
Page 50: Handset Or Headset And Casing Speaker
ET605 User Manual Using the Phone Handset or headset and casing speaker With dual audio mode activated, other persons present in the room are allowed to listen in to the third party over the phone's casing loudspeaker. 1. Use the method for handset or headset use to dial. 2. -
Page 51: Calling Number From External Directory
Call completion Note: This function depends on whether it is available in your network or not. On VTech phones call completion means that when a called number is busy or not available, you can have your phone call you back as soon as the dialed number is not busy anymore or available again. -
Page 52: Accepting Calls
ET605 User Manual Using the Phone Fig. 1 Fig. 2 • Press to turn off call completion for this call (Fig. 2). • Press if you wish to dial another number while waiting for call completion (Fig. 2). You can now hang up the handset to return to the idle screen;... -
Page 53: Call Waiting
ET605 User Manual Using the Phone Call waiting When you are in a call (Fig. 1), another call coming in will be announced visually by the flashing call LED and by the Call Waiting screen (Fig. 2); it will also be announced acoustically by a double beep. If you want to switch to visual or acoustic announcement only or turn call waiting off completely, see "Call waiting"... -
Page 54: Active Calls
ET605 User Manual Using the Phone ctive calls Hold One call on hold Press to put the ongoing call on hold. Held calls are indicated threefold: ◦ By the text on the display. ◦ By the slowly blinking line key. ◦... -
Page 55: Conference
ET605 User Manual Using the Phone • When the connected call is on-screen, you can transfer it to a third party or terminate it by pressing • When a held call is on-screen, press to connect to it; if you are currently connected to the second call, it will simultaneously be put on hold. -
Page 56: Transferring Calls
ET605 User Manual Using the Phone Transferring calls You can transfer a connected call as well as a call ringing on your phone. Note: The phone can handle two simultaneous connections. If there already is a second connection, either a call on hold or ringing, you must terminate/reject that second call before you can transfer the call. -
Page 57: Terminating Calls
ET605 User Manual Using the Phone erminating calls • When using the handset: Place the handset in the cradle or press • When using speakerphone or a headset: Press issed Calls Missed calls are indicated by the call LED (steady light) and by the text "Missed:" and the number of missed calls in the status line (Fig. - Page 58 ET605 User Manual Using the Phone 1. Viewing the lists. Press the function key underneath to open the Call History. ◦ All calls: Press ◦ Missed calls: Press ◦ Received calls: Press ◦ Dialed calls: Press . Alternatively, press to access the list of dialed calls directly (redial). 2.
-
Page 59: Rejecting Or Redirecting Incoming Calls
ET605 User Manual Using the Phone ejecting or redirecting incoming calls This includes manual and automatic rejection and redirection and rejection of anonymous calls. Manually If you do not wish to pick up a ringing call, you have three options: Letting the call ring and not picking it up, rejecting it manually, or transferring it manually to a third party. -
Page 60: Rejecting Anonymous Calls
ET605 User Manual Using the Phone Rejecting anonymous calls With this setting you can have your phone reject calls from phones that are blocking or not transmitting their numbers. Please note: Calls from analog phone connections without caller ID will, most likely, be received as anonymous calls. -
Page 61: Making/Changing The Settings On The Phone And Turning On Call Forwarding
ET605 User Manual Using the Phone Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox specified as this function’s target. In the default setting, one of the symbols is available in the function key line and can be used to turn forwarding of all calls on and off, respectively, by pressing the function key underneath the symbol, but you can also map the function onto another function key or use the settings menu as shown in the table below. -
Page 62: Turning Off Call Forwarding
ET605 User Manual Using the Phone The status line and the status info screen will indicate that call forwarding is turned on and the number to where incoming calls will be forwarded. Fig. 1 Fig. 2 Fig. 3 Note: Call forwarding is indicated in the status line, which can display only one message at a time;... -
Page 63: Turning Forwarding Of All Calls On/Off With A Programmable Function Key
ET605 User Manual Using the Phone Turning forwarding of all calls on/off with a programmable function key Turning call forwarding on 1. Press . The display will show the Target when Forwarding screen. Note: If the function key is not available when the display is in idle mode, you can make it available on the Function Keys page of the phone's web interface. -
Page 64: Configuring The Function Keys
ET605 User Manual Configuring the Function Keys onfiguring the function keys See "Opening the web interface" on page 35 on how to open the phone’s web interface. See "How the web interface works" on page 36 on the mechanics of navigating in the windows and changing the settings. Any changes you make will not take effect until you click Apply, and changes will be lost if you open another page of the web interface without first clicking Apply. - Page 65 ET605 User Manual Configuring the Function Keys ◦ Number Enter one phone number or value for the function or, if the function is key event, select an event from the drop-down list. Enter phone numbers exactly the way they need to be dialed, i.e, type the number without spaces or punctuation marks between the digits.
-
Page 66: Programming The Function Keys
ET605 User Manual Configuring the Function Keys After you have clicked Apply, the Save button appears at the top of the window. Click Save to prevent the changes to be lost if there is a power outage or if the phone is disconnected from its power source. rogramming the function keys The idle function of each function key can be changed by clicking on the drop-down list to the right of the text field, selecting a function from the list, and clicking on the Apply button. -
Page 67: Example 1, Extension Monitoring And Call Pick-Up
ET605 User Manual Configuring the Function Keys Example 1, Extension monitoring and call pick-up This feature makes it possible to pick up a call ringing on another extension, for example when the other extension is busy or when the user is absent. The prerequisites for this function are: ◦... -
Page 68: Example 2, Changing The Setting Of A Context-Sensitive Key
ET605 User Manual Configuring the Function Keys Example 2, Changing the setting of a context-sensitive key In the following example, the setting of the left function key F1 underneath the display (Fig. 1) will be changed from Settings menu (Fig. 2) to Favorites (Fig. 3). Fig. -
Page 69: Customizing The Phone Settings
The phone supports up to four accounts or "phone numbers" with one or more providers or within an office or organization network. On VTech phones these accounts or phone numbers are called "identities". Note: If your phone is part of an office network, you may need to contact your administrator to configure new or change existing identities, as this can only be done when the phone is running in administrator mode and when the PBX settings allow it. - Page 70 ET605 User Manual Customizing the Phone Settings On the web interface Open the web interface and click on an identity in the menu on the left. The configuration window for that identity will open; it contains four tabs, with the left one, Login, visible in the front. To view Features, SIP, NAT, and RTP pages, click on the respective tab;...
-
Page 71: Assigning Ringtones
ET605 User Manual Customizing the Phone Settings Note: If you want the activity on the monitored phones to be displayed on your idle screen, enable the "Go to Call Monitor on Activity" on the Advanced Settings page > Behavior tab > Phone Behavior section. 3. -
Page 72: Date And Time Formats
ET605 User Manual Customizing the Phone Settings ate and time formats Date and time formats can be set on the phone and on the web interface. The defaults are US time format and 24-hour clock (Fig. 1 and 2). European date and time formats are shown in Fig. 3 and 4, US date and time formats in Fig. -
Page 73: Time
ET605 User Manual Customizing the Phone Settings US Date Format Date Setting "On" Setting "Off" March 5, 2018 03/05/2018 05.03.2018 March 12, 2018 03/12/2018 12.03.2018 December 5, 2017 12/05/2017 05.12.2017 December 10, 2017 12/10/2017 10.12.2017 2. Click on "Apply" and "Save". Time The time setting affects phones and/or firmware versions with a digital clock only. -
Page 74: Language Settings Of Phone And Web Interface
ET605 User Manual Customizing the Phone Settings On the phone 1. Press > 1 Preferences > 2 Date & Time > 1 Time Zone. Fig. 1 Fig. 2 ◦ Press to collapse the list to show only selected times zones and/or locations where the phone language is spoken. -
Page 75: Web Interface Language
ET605 User Manual Customizing the Phone Settings Setting on the web interface 1. Open the Preferences page > General Information section > Language. 2. Select the language from the drop-down list. 3. Click on "Apply" and "Save". Web interface language 1. -
Page 76: Call Forwarding
ET605 User Manual Customizing the Phone Settings all forwarding This feature automatically redirects all or certain incoming calls to another phone or a mailbox. If you set call forwarding on the phone, the settings are applied to all configured identities on the phone. On the web interface, the settings are configured separately for each identity. -
Page 77: Call Completion
On VTech phones, call completion means that when a called number is busy or not available, your phone will call you back as soon as the dialed number is not busy anymore or available again. The factory default setting is "off". -
Page 78: Call Waiting
ET605 User Manual Customizing the Phone Settings all waiting Default setting: When in a call, another call coming in is announced visually in the status line and acoustically by a double beep. See "Call waiting" on page 53 on how to use this feature. Available settings: ◦... -
Page 79: Hiding My Caller Id
ET605 User Manual Customizing the Phone Settings iding my caller ID With this setting your phone number will not be transmitted to any phones you call. Please note that your call may not be accepted if the other phone is set to reject anonymous calls (see next item). Setting on the phone 1. -
Page 80: Speed Dial
ET605 User Manual Customizing the Phone Settings peed dial You can use the numbers 0 to 30 and the special characters # and * to speed dial frequently dialed and/or long numbers without having to enter the complete phone number. The numbers must be set on the phone's web interface first. -
Page 81: Software Update
Software Update oftware update anual update 1. Open a browser and enter the address https://businessphones.vtech.com. 2. Point to Products and click SIP Phones. 3. Click ET600 Series. 4. Scroll down the page and click the ErisTerminal® SIP Deskset ET605 link. -
Page 82: Troubleshooting
ET605 User Manual Troubleshooting roubleshooting eboot In user mode 1. Press 2. Press 4 Maintenance. 3. Press 2 Reboot. 4. When asked whether to "Reboot?", press 5. Wait for the idle screen to reappear. In admin mode 1. Press 2. Press 5 Maintenance. 3. -
Page 83: Appendix 1 - Display Symbols And Icons
Turning DND on and off Contacts list Forwarding all calls (turning on/turning off) Presence signaling on/off Retrieving messages from mailbox Settings menu Directory IP address of phone and VTech's web address Redial (dialed calls) Received calls Missed calls Favorites LDAP Directory Next outgoing ID... - Page 84 ET605 User Manual Appendix 1 Context-sensitive symbols These are the symbols displayed in the function key line when the phone is active, for example when a call is ringing, when you are dialing, etc. Confirming a selection or an action Terminating/canceling an action and returning to the previous screen Switching input mode to lower case letters Switching input mode to upper case (capital) letters...
-
Page 85: Display Indications
ET605 User Manual Appendix 1 isplay indications On activity Outgoing call ringing Incoming call ringing Connected Holding call Call being held by other party On idle screen Outgoing identity • Active identities are indicated by the phone symbol. If there is more than one active identity, an arrow precedes the current outgoing identity. •... -
Page 86: Appendix 2 - Status Messages
ET605 User Manual Appendix 2... -
Page 87: Appendix 3 - Wall Mounting
ET605 User Manual Appendix 3 Appendix 3 - Wall Mounting The ET605 wall mount bracket is available as a separate accessory. Front Back The two holes on the wall bracket marked can be hung on two screws or on the studs of a US standard ethernet wall plate (4"... -
Page 88: Measurements
ET605 User Manual Appendix 3 1. Plug in the ethernet cable and, if needed, the power cable and the optional PC cable (Power adapter/cable and PC cable are not included in delivery). 2. Hang phone and bracket on the two screws on the wall or on the studs of the ethernet wall plate. 3. -
Page 89: Appendix 4 - Programmable Functions
ET605 User Manual Appendix 4 ppendix 4 - Programmable Functions Following is a brief description of the function key settings available on the Function keys page of the phone's web interface. reely programmable functions Action URL Action URLs are basically HTTP GET Requests that allow the phone to interact with web server applications. - Page 90 ET605 User Manual Appendix 4 Extension This function key allows showing the status (idle, ringing, held call, busy) of another extension on the key's LED. By pressing the key, it may also be possible to pick up calls ringing on the extension, to dial the extension when the phone is idle, and to transfer an incoming call ringing on your own extension.
- Page 91 ET605 User Manual Appendix 4 Line “Line” key can behave as a private line or shared line key, according to the setting user_shared_line. Private Line: Default setting for all freely programmable function keys. Incoming calls will go to the first free "line"...
- Page 92 ET605 User Manual Appendix 4 Starcode Making SIP calls without audiovisual indication on the phone user interface (PUI). Examples for using this feature: • Controlling settings on the PBX with dedicated keys that turn PBX functions on and off. The available functions must have been set on the PBX and they must be accessible from the phone, typically by dialing a star code.
-
Page 93: Key Events
- forwarding number. Help Displays the URL of the phone's web interface and the URL to the VTech web page. The IP address, MAC address, and firmware version can be found in the phone menu: Settings > Information >... - Page 94 ET605 User Manual Appendix 4 OCIP Access the Broadsoft directory via the Open Client Interface-Provisioning (OCI-P) that allows third- party applications to peform all business functions peformed by BroadWorks. Presence State Providing access to a list where the Presence state of each registered SIP Identity can be defined (online, offline, busy, invisible).
- Page 95 VTECH COMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008. VTech is a registered trademark of VTech Holdings Limited. Copyright © 2018 for VTECH COMMUNICATIONS LTD. All rights reserved.
Need help?
Do you have a question about the ErisTerminal ET605 and is the answer not in the manual?
Questions and answers
forgotten the admin password, how to factory reset using tftp servre