VTech ET685 Administrator And Provisioning Manual page 363

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Lists all statuses that should make the phone beep in idle (i.e. no calls)
whenever they are active. The list is prioritized, the first active status found
determines the beep-mechanism. Starting with version 8.9.3.54 the beep
set of every active status will be played one after the other.
How to define the beep-mechanism:
statusmessage[:reminder time in s][/index of beep set]
beep sets are:
1 - beep one time
2 - beep three times
3 - beep five times
e.g.: EthernetUnplugged PhoneWantsReboot/2 CurrentIdentityIsDnd:10/3
PhoneHasMissedCalls:300
1 beep for ethernet cable is unplugged, no repetition
3 beeps for phone wants to reboot, no repetition
5 beeps for do not disturb current identity, repeating them every 10
seconds
1 beep for missed calls, repeating it every 5 minutes
See also status_msgs_that_show_directly,
status_msgs_that_are_essential, status_msgs_that_are_important,
status_msgs_that_are_blocked, status_msgs_to_pop_up and
idle_status_btn_index
space separated list of keywords
See setting status_msgs_that_are_blocked
PhoneHasIncomingPublicAnnouncement
stun_binding_interval
Sets the STUN interval time in seconds. After its expiration a new STUN
requests will be send out. If it results in another IP/port the identity will be
re-registered.
integer
blank
stun_server
363
Back to Contents