VTech ET685 Administrator And Provisioning Manual page 375

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
blind, attended
blind
transfer_on_hangup
If you want to transfer two calls by placing the handset onhook (one
incoming call and one outgoing call), you can switch it on here.
on, off
off
transfer_on_hangup_non_pots
If you want to transfer two calls by placing the handset onhook
(independent of call direction (incoming / outgoing): that will be not a Plain
Old Telephone Service "pots") , you can switch it on here. Condition:
"transfer_on_hangup" must be set to "on".
on, off
off
transfer_on_hangup_with_starcode
If setting 'transfer on hangup' is set to on and the first call was picked up
with a PBX starcode then the transfer will be done if this setting is set to
on. Info: a picked up call with starcode is an outgoing call. But an incoming
and an outgoing call is the condition for the 'transfer on hangup'.
on, off
off
uboot_lock
Internal
The uboot lock feature allows to protect the phone from using the
uboot/rescue mode update/reset mechanism by unknown users.
Integer
blank
375
Back to Contents