VTech ET685 Administrator And Provisioning Manual page 100

Setting
Redundant Softkeys
Show Image in Calls
Show IVR digits during
connected
Global counter for
Missed Calls
Active Identity Scrolling
Scroll step interval
Scroll step pause
Scroll step count
Show identity index
Show call status info
Advertisement
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
When showing a list in minibrowser while the
minibrowser-xml does not define any context-keys on its
own: this setting decides if to show navi-keys instead or no
keys at all.
Defines whether or not to show a symbol/photo during a call.
Turning this off will leave more area for displaying the party
names and other information during a call.
This setting controls whether digits pressed during a
connected call are shown on the display or not. These digits
are usually used to control IVR prompts and to enter user
specific information e.g. calling card number, pin codes,
credit card number, billing info etc. Turning this setting off
ensures privacy by disabling the display of these digits. The
actual keys are either not shown at all or replaced replaced
by *.
When set to <on>, the phone will count missed calls on all
registered lines and show them on the phone. If turned
<off>, missed calls for the active identity will be shown on
the display.
Turn on/off active line scrolling using navigation key in idle
state.
Time in ms to make the next step for text scrolling.
The setting describes for how many scroll-steps the
scrolling is paused when its beginning of a scrolling text is
shown. For phones that don't use circle-scroll-technique,
but instead scroll to the end and then start up front again,
this stop-time also describes the pause at the end.
Defines the number of steps a text is scrolled, e.g. when =1
a scrolling text would first show it's beginning and next its
end. For smoother scrolling, you will need a high number.
Text always scrolls at least 1 pixel per step.
Possible scroll pause when showing beginning or end do
not count as extra scroll steps.
Shows local sip line index during call states in adition to the
remote user display name/number/url
if turned on the call progress is shown in the headline of the
call progress window e.g. (100 Trying, 180 Ringing etc).
This setting distinguishes whether an Advertisement page is
displayed on the VTech phone WebUI home page. This
setting is related to the setting advertisement_url.
100
Back to Contents