VTech ET685 Administrator And Provisioning Manual page 318

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
This setting is used to toggle the support for draft-ietf-sip-outbound-20.
Enable this to force the reusage of connections, what VTech phones
already do. However, in combination with setting offer_gruu, the phone will
stick to the network flow created during line registration. Additionally you
have to specify a value for setting keepalive_interval.
on, off
off
offhook_accept_calls
If set to 'on' going offhook accepts an incoming call.
on, off
on
offhook_dial_prompt
If this setting is on, the phone will offer a dial prompt when the handset
goes offhook. Otherwise, the phone stays in idle state.
on, off
on
onhook_debounce_timeout
Delay in milliseconds for debouncing of the mechanical hook switch. On
phones with electronic hook switch, this setting should be zero.
Integer >=0
blank
outgoing_identity
Contains the number of the outgoing identity. This value is retrieved
automatically from the active_line configuration.
1-12
1
318
Back to Contents