VTech ET685 Administrator And Provisioning Manual page 344

Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
settings_refresh_timer
If a value greater than 0 is set (=number of seconds) the phone
configuration will be requested from the setting server after the time has
elapsed. After fetching the settings from the "setting server URL" they will
be applied and the timer will be reset to the latest received value.
Integer
0
short_cancel_denies_call
If value is true a short key press of cancel key will deny an incoming call.
A long press (2sec.) cancels the connected call. If value set to false it
works vice versa.
Note:
Firmware 8.4.21 or above is required to use this.
This setting will only take effect on phone models without call screens
settings. For all other phones, you can select which call to cancel by
navigating through the list of available calls.
on, off
on
short_form
In order to let the phone generate short compact SIP headers this option
should be enabled. Otherwise the old usual style of SIP headers will be
generated.
on, off
off
show_call_status
If turned on, the call progress is shown in the headline of the call progress
window e.g. (100 Trying, 180 Ringing etc).
on, off
off
344
Back to Contents