VTech ET685 Administrator And Provisioning Manual page 149

Setting
Handle Active Identity
Mailbox only
Return to idle screen on
offhook
Dial prompt on offhook
Watchdog
Prioritise Asserted
Go to Call-Monitor on
Activity
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
If this setting is on, the Retrieve button will dial the mailbox
of the active line. Otherwise the mailbox associated with the
first MWI message in the queue is used. Starting with
fw.versions 8.7.3.18 / 8.7.4.6 this setting also changes
which type of status-msg is used for signaling messages on
PBX. When set to on, the statuses
CurrentIdentityHasTextMessages and
CurrentIdentityHasVoiceMessages are used. When set to
off the statuses PhoneHasTextMessages and
PhoneHasVoiceMessages are used. I.e. changing this
setting will automatically change the status-msg controlling
settings: status_msgs_that_show_directly,
status_msgs_that_are_essential,
status_msgs_that_are_blocked and
status_msgs_that_are_important
If this setting is on, the phone will go to idle state even when
the handset is offhook i.e. it will not prompt the user to dial
a new number.
If this setting is on, the phone will offer a dial prompt when
the handset goes offhook. Otherwise the phone stays in idle
state.
The watchdog will watch your phone, if the phone will
freeze, the watchdog initiates a hard reboot of the phone.
This watchdog is based on the linux software watchdog.
SIP messages like INVITE may include asserted
information (p-asserted-identity). If this setting is enabled,
the phone displays the name provided by the asserted
information with the highest priority. Only if no asserted
information is given the priority defined by the related setting
contact_source_priority will be considered.
When any of your monitored lines shows an activity (other
than idle), the phone will automatically display the
call-monitor state. This behaviour is simular to the setting
Call Pickup and replaced it since version 8.7.2 on all phones
models. See also
pui_states_allowing_state_switch_on_activity and
goto_virtual_keys_state_on_activity.
149
Back to Contents