VTech ET685 Administrator And Provisioning Manual page 165

Setting
Administrator Password
Administrator Password
(Confirmation)
Mininum PIN length
Maximum PIN retries
HTTP Server:
User
Password
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
This setting is accessible when the phone is running in
administrator (admin) mode. The default administrator
password (admin PW) is "0000". When the phone is running
in user mode (i.e., many settings are not available), you
need the admin PW to switch the phone to admin mode.
This setting requires confirmation (see
Settings/admin_mode_password_confirm). Note: We
recommend that you replace the default admin PW by an
individual one; if you do not, an unauthorized third party with
access to the phone could set an admin PW unknown to
you. In such a case, you would no longer be able to switch
from user mode to administrator mode. If you set your own
admin PW, be sure to write it down and store it in a secure
place. If you lose your admin PW, you will not be able to
return the phone to admin mode without a factory reset of all
values.
This setting is required to confirm the admin password set at
Settings/admin_mode_password to make sure that you
have not made any typing errors when entering the
password.
Determines the minimum length that a PIN must have. A
value of 0 indicates that a PIN is not required. If the length
of the currently configured PIN is less than the value of this
setting, the user will be prompted to create a new PIN which
meets this requirement at the first attempt to manually lock
or unlock the keyboard. On OCS servers this setting is
provisioned via inband provisioning parameter
ucMinPinLength, but only if its value is greater than the
setting's current value.
Determines how many times the user may enter a wrong
PIN before the keyboard is locked permanently. A value of
zero indicates that there is no limit. Once the keyboard has
been permanently locked, the user is prompted to reset the
PIN when an attempt is made to unlock the keyboard. To
reset the PIN the user must first enter the user password of
the active identity. Then the user is prompted to create a
new PIN. If the user cancels the PIN reset action, the
keyboard remains locked.
With this setting, you can select the HTTP username for
your phone. Together with the HTTP Password option, it will
protect your web interface.
Set up the HTTP password for your phone here.
165
Back to Contents