VTech ET685 Administrator And Provisioning Manual page 222

Description:
Values:
Default:
Setting:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
When this setting is "on" AND the phone is set to a US time zone, any
numbers you dial will be formatted on the display like the following
examples:
1. National format: 9785550123 will be shown as (978) 555-0123;
formatting will start when the 4th digit is entered.
2. Service numbers (depending on availability in your area): A service
number beginning with 511, for example, will be shown as (511) -xxxx;
formatting will start when the 4th digit is entered.
3. International access code (for dialing numbers outside NANP):
Numbers beginning with the international access code 011 will be shown
as 011-x-xxxxxx. Formatting will start when the 4th digit is entered; the
country dialing code (the digit(s) enclosed by the two hyphens) can consist
of one or more digits.
Examples:
After you have entered the four digits 0114, the display will show them as
"011-4".
Entering 9 as a fifth digit will result in "011-49-" because 49 is an existing
country dialing code (Germany).
Entering 2 as a fifth digit will result in "011-42" without the second hyphen
because there is no "42" country dialing code; entering 0 as the sixth digit
will result in "011-420-" because 420 is an existing country dialing code
(Czech Republic).
Note: U.S. dialnumber format is the default setting, but will only be
activated when the selected time zone on the phone is a US time zone.
on, off
on
dialplan_count_failed_match_groups
222
Back to Contents