VTech ET685 Administrator And Provisioning Manual page 168

Setting
Update Policy
Setting URL
Settings refresh timer
PnP Config
Prov Polling
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
Select the update policy you wish to adopt for your phone.
(Only applicable when using mass deployment).
"Update automatically": load settings from settings

server, but the user is not prompted to acknowledge
the update, means full automatic provisioning.
"Ask for update": load settings from settings server

and the user is prompted to acknowledge the
update.
"Never Update, load settings only": load settings

from settings server only, no update is initiated,
means update disabled.
"Never Update, do not load settings": do not load

any settings or updates from settings server at all,
means provisioning disabled.
Attention: update_policy affects all downloaded files: with
"Never Update, do not load settings" value, the phone will
not download any files (VPN config tarball, language files,
etc.)
Enter the URL of the settings server from where you would
like to obtain the configuration file to configure your phone.
If a value greater than 0 is set (=number of seconds) the
phone configuration will be requested from the setting
server after the time has elapsed. After fetching the settings
from the setting server URL they will be applied and the
timer will be reset to the latest received value.
If turned to on, the phone will try to retrieve its settings via a
Plug-and-Play (PnP) Server. Modern SIP PBXs/Proxys can
provide the PnP configuration data for the VTech phones.
Please refer to the manual of your PBX/Proxy. If the PnP
configuration fails, the phone will try to get the settings from
a setting server.
If set to "on", automatic periodic provisioning server polling
for upgrades is enabled.
168
Back to Contents