VTech ET685 Administrator And Provisioning Manual page 382

Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
on, off
on
use_contact_in_refer_to_hdr
This setting determines which header to use as the source for the Refer-To
header in a REFER. When this setting is on the Contact header is used
otherwise the remote AoR (taken from To or From header, depending on
the direction of the call).
on, off
on
use_hidden_tags
You can protect the phone's web interface with hidden security tags
against remote attackers trying to change phone settings with faked HTTP
POST requests (XSRF attack).
on, off
off
use_NTLMv2
This OCS-only setting determines whether NTLMv2 should be used for
authentication. Normally this should be on. Note that NTLMv2 requires the
system time and may not work in an environment where no NTP server is
available. In this case NTLMv1 should be attempted (the server must allow
it) by turning this setting off.
on, off
on
user_active
This identity can be disabled by disabling this option. This means this
identity is not longer registered anymore.
on, off
on
382
Back to Contents