VTech ET685 Administrator And Provisioning Manual page 270

Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
keyevent F_PREV_ID
ieee8021x_eap_auth_method
This setting determines the IEEE802.1X EAP authentication method.
When "EAP-MD5" is selected, the settings
ieee8021x_eap_md5_username and ieee8021x_eap_md5_password
must be set appropriately.
When "EAP-TLS" is selected, certificates and config file must be provided
(Certificates -> 802.1X Certificates).
off, EAP-MD5, EAP-TLS
off
ieee8021x_eap_logoff
This setting enables the EAP Logoff mechanism. When enabled, the
phone sends an EAPOL Logoff on behalf of an attached client, when the
client got disconnected and had no chance to send an EAPOL Logoff by
itself.
The phone extracts the client's MAC address from the last received
EAPOL Start and EAP Response Identity packet.
on, off
on
ieee8021x_eap_md5_password
This setting specifies the password that is used for IEEE802.1X EAP-MD5
authentication.
String
blank
ieee8021x_eap_md5_username
This setting specifies the username that is used for IEEE802.1X EAP-MD5
authentication.
String
270
Back to Contents