VTech ET685 Administrator And Provisioning Manual page 119

Setting
On Code
Off Code
DND:
On Code
Off Code
Server Managed:
Call Forwarding Always
Call Forwarding Busy
Web User Interface (WebUI) Reference
ET685 Administrator and Provisioning Manual
Description
When set, the given starcode, appended by the redirection
target, will be dialed whenever redirection after timeout gets
enabled or changes the target for the specific identity.
If the PBX is handling the redirection, it can be specified
which star code disables this functionality at the PBX for the
specific identity.
<on> means that the phone is in do not disturb (DND) mode,
<off> is normal behavior.
If the PBX is handling DND, it can be specified which star
code enables this functionality at the PBX.
If the PBX is handling DND, it can be specified which star
code disables this functionality at the PBX.
If this setting is on the server will be responsible for handling
the global forwarding functionality. From the call
perspective, the phone will act as if no forwarding was set
(all is managed by the server). The PUI will show the current
setup if the server synchronizes it's values with those on the
phone (Call Forwarding: Always and Target). This setting
does not specify how the server changes the redirection
values nor how the phone updates them. (it may be done via
TR69, DFKS or starcodes). This setting does not specify
how the server changes the value of parameter
server_managed_dnd_state, nor how the phone updates
them (it may be done via TR69).
If this setting is on the server will be responsible for handling
the redirect on busy functionality. From the call perspective,
the phone will act as if no redirect was set (all is managed
by the server). The PUI will show the current setup if the
server synchronizes it's values with those on the phone
(Call Forwarding: Busy and Target). This setting does not
specify how the server changes the redirection values nor
how the phone updates them. (it may be done via TR69,
DFKS or starcodes). This setting does not specify how the
server changes the value of parameters
server_managed_fwd_busy_state and
server_managed_fwd_busy_nr, nor how the phone updates
them (it may be done via TR69).
119
Back to Contents