VTech ET685 Administrator And Provisioning Manual page 250

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Setting:
Description:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
There are several (varies by fw-version, since 8.7.4.7: 17) of these general
purpose xml descriptions (gp-xml) available. They offer a way of creating
xml-entites without tying it to a specific key. Since 8.7.4.7 you can also
decide to use a gp-xml as context-key on screen by inserting "GP_XML[n]"
(with n being the index of the gp-xml, first one is 0) into one of these
settings:
call_screen_fkeys_on_incoming
call_screen_fkeys_on_outgoing
call_screen_fkeys_on_connected
call_screen_fkeys_on_holding
fkeys_on_dialing
XML definition
blank
global_missed_counter
When set to <on>, the phone will count missed calls on all registered lines
and show them on the phone. If turned <off>, missed calls for the active
identity will be shown on the display.
on, off
on
goto_monitor_state_on_line_activity
When any of your monitored lines shows an activity (other than idle), the
phone will automatically display the call-monitor state. This behaviour is
simular to the setting Call Pickup and replaced it since version 8.7.2 on all
phones models.
See also settings: pui_states_allowing_state_switch_on_activity and
goto_virtual_keys_state_on_activity.
on, off
off
gui_fkey_label
Defines the short label to be used to describe the dkey. The index ranged
from 0 to 3, where 0 is the first dkey on the left.
250
Back to Contents