VTech ET685 Administrator And Provisioning Manual page 291

Description:
Values:
Default:
Setting:
Description:
Values:
Default:
Configuration File Parameter Guide
ET685 Administrator and Provisioning Manual
Setting describes what to show as decription for a key that has neither its
fkey_label setting set nor an XML-description that provides a label. You
may define any arbitrary fixed text but note that there are three key words
that allow to insert dynamic information related to the key:
$name :
on a (shared) line key:

when there is an active call on the key:

the remote name (or number if no name is available) is
inserted.
when there is no active call:

when context is 'active' and $type is not also included:

the key type is inserted.
when context is a specific identity:

the local name or number is inserted.
on other keys:

the destination configured on the key is inserted.
$type will insert the key type
$state will insert the key state, when applicable (not all keys have states)
Setting with index 0 describes the format of the upper left key on the first
ET6 attached on phones without self-labeling keys. On phones with
self-labeling keys, 0 describes the format of the first key on page 1.
Related settings: label_state_format
any string
$name
label_font_size
The font size, in pixels, used for the self-labeling keys display. If a value is
entered that is out of bounds, the setting reverts to the closest boundary
value.
9-19
13
291
Back to Contents